Monday 16 May 2016

Update on old DisplayLink drivers

An update on my earlier post of 2012.

Driver 1.1.62 (15 May 2016) is now available at http://www.displaylink.com/downloads/ubuntu and does not require any fixups for wrong USB vendor ID numbers, or patches for kernels > 4.5.0

For my HP displaylink hub I have:

/etc/udev/rules.d/50-displaylink.rules:

# DisplayLink devices always have the active configuration on configuration #1
ATTR{idVendor}=="17e9", ATTR{idProduct}=="01d4", RUN+="/usr/bin/dlconfig"


and /usr/bin/dlconfig:

#! /bin/bash

echo 1 > "/sys/$DEVPATH/bConfigurationValue"


However, I must insert the USB device AFTER logging into to X or I get two fb devices added, one owned by udl and one by evdi. I suspect this is a race condition problem.

In any case, none of it works for me -- I'm not able to view anything at all on the frame buffer. I guess my USB device is too old.

However, if I modprobe udlfb and ignore the evdi drivers, and udl then I at least get a working framebuffer that can display images with fbi. -- but the colour depth is stuck at 16.

I'm able to use it as a primary device for an X11 session with this /etc/X11/xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "glx"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
    Identifier  "Card1"
    Driver    "fbdev"
    BusID    "USB"
    Option    "fbdev"    "/dev/fb1"
    Option    "ReportDamage"    "true"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card1"
    Monitor    "Monitor0"
    DefaultDepth    16
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
EndSection

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. thanks for the update. It was very useful. Devs from my company use ubuntu while working on data room virtual so this was very interesting for me to read.

    ReplyDelete